The cutter suction dredger has high requirements on the environment. If the cutter suction dredger works when the wind and waves are high, the hull and reamer of the cutter suction dredger will be affected, which will affect the normal use of the equipment. The cutter suction vessel not only has hig......
Read MoreAfter the dredger is in place, the dredging and filling construction is carried out by using the steel pile positioning cross excavation construction method. This is a kind of main positioning pile that falls on the midline of the groove as the rotation center of the hull. Through lateral action, th......
Read MoreDredging is generally defined as the underwater removal of sediment and its transport from one location to another. Dredging is a process that may include steps to bring sediment up from the surface of the water bed, and optionally to remove sediment from the area to be dredged, and then finally dis......
Read MoreDredging engineering refers to the engineering of excavating the bottom mud, sand and stone in the channel or port waters according to the specified scope and depth and processing them. Dredging is one of the main means of developing, improving and maintaining waterways and port waters.
Read MoreThe cutter suction dredger is widely used and can be used in rivers, lakes and seas for dredging, channel excavation, and land reclamation. Under special circumstances, high-power reamer equipment is installed on cutter suction dredgers to excavate rock formations such as basalt and limestone withou......
Read More