6 inch Hydraulic Cutter Suction Dredger Brands

The 6 inch Hydraulic Cutter Suction Dredger Brands is a static dredger, which can cut the hard soil into fragments by rotating the cutter head. The materials are pumped into the floating pipeline by the dredging pump and transported to the designated area for a long distance. The hull of the 6-inch cutter suction dredger is relatively small, and its activities are relatively flexible compared with large dredgers. It can not only be used to clean the sludge of rivers, ports and various water bodies, but also be used in sand mining, beneficiation and other industries. The scope of application and geographical conditions are relatively wide.

Send Inquiry

Product Description

1.Brief introduction of 6 inch cutter suction dredger
The 6-inch cutter suction dredger is a static dredger, which can cut the hard soil into fragments by rotating the cutter head. The materials are pumped into the floating pipeline by the dredging pump and transported to the designated area for a long distance. The hull of the 6-inch cutter suction dredger is relatively small, and its activities are relatively flexible compared with large dredgers. It can not only be used to clean the sludge of rivers, ports and various water bodies, but also be used in sand mining, beneficiation and other industries. The scope of application and geographical conditions are relatively wide.

2.The specification of 6 inch Hydraulic Cutter Suction Dredger Brands

Dredger  LOA 17.0m
Hull size(L*B*H) 13.0*5.2*1.5m
Main pontoon(L*B*H) 8.3*2.2*1.5m
Side pontoon(L*B*H) 11.0*1.1*1.5m
Structure Can be dismantled and re-assembled easily box structure lower delivery cost
Main engine brand and power Weichai  220kw
Harbour generator 50GF/Cummins
Dredging pump Warman Technology
Discharge pipe inner Dia. 150mm
Head 30m
Max. dredging depth 8m
Water flow 800m3/h
Solid sand capacity 160m3/h
Discharge distance

800m

Cutter head Dia. 1300mm
Cutter power 30kw
Draught 1.1m
Displacement 100T
Hydraulic control system PLC siements
Wire rope pulling force(lifting winch)*quantity 40KN*2
Wire rope pulling force(traversing winch)*quantity 40KN*2
Operation room Adjustable chair, movable side-window, air condition, PLC system,signal lights and floodlights
Total weight 60T
Total power 220kw
Total fuel oil consumption 33L/H


3.   Towing and anchoring preparation of 6 inch cutter suction dredger:

1) After the completion of dredger construction, before towing or transferring to the construction site, the transverse anchor shall be recovered and fixed, and the anchor raking rod shall be recovered and fixed.
2) The dredger is inserted into the cutter bridge and the fixed pin of the traverse winch.
3) Take back the dredging signal and light beacon, check and set the towing signal.
4) Remove the tail sludge discharge pipe and form a formation.
5) Lift the steel pile to a safe height and insert the fixing pin. Or pile overturning.
6) Prepare streamers, mooring lines and arrange staff on duty.


4.The Factory

1) Milestone excavator company has a development history of more than ten years and has a good reputation.
2)Quality control and customer’s requirements are our first priority for running the business.
3) The company successfully exported the equipment to Nigeria, Kazakhstan, Chan, Indonesia, Philippines, Thailand, Maldives and other countries and regions
4) Complete and considerate after-sales service --- engineers' on-site installation training, all-weather technical support, free replacement of parts in the first year, and then replacement and service at cost price.

If you are interested in our equipment, please don’t hesitate to contact us:



Hot Tags: 6 inch Hydraulic Cutter Suction Dredger Brands

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.